储存温度 :
|
常温
|
外型尺寸 :
|
20*3.2
|
额定容量 :
|
210
|
用途 :
|
电子产品
|
产品认证 :
|
ROHS
|
标准电压 :
|
3
|
化学类型 :
|
锂锰电池
|
品牌 :
|
高能
|
保质期限 :
|
3年
|
包装 :
|
工业包装
|
标准容量 :
|
210
|
型号 :
|
CR2032
|
二、绿量科技厂房建设
自有工业用地180亩,合12万㎡。拥有2.5万㎡工业厂房,1.5万㎡产学研大楼及配套设施。
三、绿量科技生产能力
5条连铸连轧环保电池锌饼生产线、60台锌筒专业压铸机, 加工车间、碳棒加工车间,注塑加工车间、6条环保锌锰干电池自动化生产线(每分钟600粒产量)、预装自行研发的环保锌锰干电池自动化生产线20条(每分钟1000粒产量)、贴标生产线、卡装电池生产线等等,目前年产电池锌饼1.5万吨,锌锰干电池电芯10亿支,2015年底至2016年初,随着自行研发的自动化生产线全面取代现有生产线,产能将提升4-6倍。
四、绿量科技研发能力
绿量科技现生产的环保电池材料及环保电池产品均具有自主知识产权。专利发明人林良智先生,为绿量科技技术团队 人物、高级工程师、公司总经理。现任中国中国有色标准化委员会委员、中国锌加工分会理事长,中国国家知识产局为其颁发发明专利证书如下:
发明专利之一:一种环保电池用锌材料及其制造方法。专利号:ZL2.3
发明专利之二:一种无铅环保锌锰干电池。专利号:ZL2.7
广东省科技厅对以上专利产品的科技成果鉴定意见(粤科鉴字[2006]174号)摘要:
1.该成果属国内 创, ,具有国际先进水平;
2.化学成分中铅、镉、汞等有害元素含量达到欧盟RoHS指令要求;
3.用该材料生产的电池产品放电、防漏、贮存等各项性能指标符合国家标准要求。
化学成分对照表
化学成分 | 国家标准 GB/T3610-1997 | 国家标准 GB/T3610-2010 | 欧盟RoHS标准 | 绿量科技电池 检测数据 |
铅(Pb) | ≤0.8% | ≤0.004% | ≤0.004% | ≤0.0014% |
镉(Cd) | ≤0.06% | ≤0.002% | ≤0.002% | ≤0.0003% |
汞(Hg) | ≤0.0001% | ≤0.0001% | ≤0.0005% | ≤0.000006% |
五、绿量科技质量管理
绿量科技无铅环保锌锰干电池生产和服务获ISO-9001质量管理体系认证证书,公司系列产品SGS\MSDS/RoHS\安全监测报告\货物运输报告等认证证书齐全,可出口至全球90%以上的国家和地区。
[注意事项]
(一)电池之“+,-”极应按照使用设备所规定之方向正确安装;
(二)禁止短路、加热、燃烧,非专业人士切勿拆开电池;
(三)电池工作温度:-10℃-+60℃;存储温度:-10℃-+45℃,电池储存环境应保持干燥通风
【本产品为本公司自产自销,价钱质量都有保障,为避免纠纷,请留意本条消息】售后说明:本公司产品如出现不良品,承诺一律免费包退换,考虑到利润薄弱,以及人员紧张,我司建议各位新老客户进行累计一次性退换处理,累计购买5次以上或干电池累计不良2000pcs以上、纽扣电池累计不良10000pcs以上后,一次性处理,我司全额承担往返运费哦亲!低于以上条件我司只包退换,不包运费哦。感谢您的支持,祝各位老板生意兴隆,红红火火!】
Special for Custom Description:
A customizable points of the battery discharge time
Put the divided time, means the battery discharge time continuum (3.9 ohm resistor load from the initial voltage continuous discharge to 0.9V elapsed time), reflecting the size of the battery capacity, at present, this section AAA alkaline battery factory Support discharge divided time minimum 100 minutes can be done, can be done up to 180 minutes, the longer the release time points, the heavier the battery, the more difficult the process, the higher the cost, you buyers can choose to customize according to their actual needs .
Second, you can customize the appearance and labels
If you need to customize the appearance of the battery, or you need to paste labels from requirements, our factory support this OEM OEM mode, but need to pay attention to the following points:
(A) You need to choose a good level at which a discharge between the wick;
(B) you need to provide custom battery label design source files (if there is no ready-made picture temporarily, I plant to provide free design service)
(C) You need to provide customized brand's trademark "Trademark Registration Certificate", power of attorney, and stamped with the company seal issued by the attorney trademark ownership; no ownership or custom trademark trademark, you do not need authorization, and without issue "trademark registration certificates . "
(D) You need to pay a custom mold fee, of course, if your one-time orders amounted to 200,000 and more, our plant free of mold fee, if one-time orders of less than 200,000, it does not matter, When your cumulative order volume reached 200,000 holiday we paid a full refund of your mold fee;
(V) You need to pay a certain percentage of the time deposit order in the next order, the reasons do not explain too much, this is your custom models, if you do not first pay a deposit, do not buy it if you are, I plant will be a great loss;
Third, can be customized heat shrink, card installed, the combination of
(A) can be customized shrink the number of menu tablets may shrink, shrink two, three shrink, shrink four, six shrink and the like;
(B) customizable card installed, the optional block card, two cards, three cards, four cards, five cards, Ten Day cards;
(C) can be customized combinations, such as serial, parallel, package pvc, welding and other technology.
Specific processing of various types of battery-related matters please click on the left side of the shop Want Service for consultation, thank you!
名优甄选
发送询价单
您对该公司的咨询信息已成功提交,请注意接听供应商电话。
联系人信息
请输入您的称呼
请输入正确的联系方式
请选择咨询问题
请输入正确的图形验证码
商家已收到您的消息,请注意接听供应商的来电~